User's Manual

K
KDC User Manual SYNCHRONIZATION


Synchronization Options
Synchronize KDC Time with PC Time when Connected
This option enables the user to synchronize the KDC date and time with the host date and time.
Synchronization of date and time occurs after the data is uploaded to the host device.
Delays
The user may set transmission delays between barcodes and characters during the synchronization
process. It is important to set proper delays to prevent errors during the transmission of collected
barcodes. Some Windows applications, such as Excel, require longer delay times.
Attachments
Timestamp, Barcode Type, and Serial Number may be attached to the scanned barcode by selecting
these options. The Serial Number of the KDC may be attached to the Start or End of Record.
Prefix and Suffix
z Enter the characters the user wants to attach to the front (Prefix) or back (Suffix) of the
barcode in the Prefix and Suffix fields.
z The character set is any combination of ASCII characters including alphanumeric, line feed
(“\n”), and carriage return (“\r”).
Order and Delimiter
z Select Order of Data – Type, Data, and Timestamp
z Select the Delimiter between Data – Tab, Space, Comma, and Semicolon
z Select the Delimiter between Records – None, LF, CR, Tab, and <LF & CR>
Application Options
Synchronize Non-Compliant Data
The KDC will synchronize both compliant and non-compliant data (filtered data) if Synchronize Non-
Compliant Data option is Enabled.
Consolidate Steps in One Record
KTSync will consolidate the data collected in Step 1 with the data collected in Step 2 and/or Step 3.
When Consolidate Steps in One Record is enabled, data will be consolidated into one record instead
of individual data records for each step. If this option is enabled, non-complete records, i.e. three
steps were defined but data was only collected for two steps, will be discarded.
Attach Quantity
If this option is enabled, quantity will be attached to the left or right of the data.