User's Manual

K
KDC User Manual SYNCHRONIZATION


This option lets the user automatically synchronize collected data immediately to the computer
when the KDC is connected to the host.
z IMPORTANT: Before selecting this option, remember to configure all options properly.
z Data synchronization may be done manually by clicking the synchronize icon if this option is
not selected.
Beep while Synchronization
The user may enable or disable the beep tone during the synchronization process. If this option is
selected, a beep is sounded every time barcode data is synchronized. The KDC beeps 5 times when
the synchronization process is complete.
Append Data to File
If the user has specified a file name and Append data to File option is enabled, KTSync will append
data to the existing file instead of creating a new file.
Current KDC Wedge Method
The KDC may be configured in one of five wedge/store modes:
z Wedge Only - Scanned data is transmitted to the host. The KDC does not store scanned
data.
z Wedge & Store - Scanned data is stored in the KDC and transmitted to the host.
z Store Only - Scanned data is stored in the KDC but NOT transmitted to the host.
z Save if Sent - Scanned data is stored in the KDC ONLY if transmission to the host is
successful.
z Save if Not Sent - Scanned data is stored in the KDC ONLY if transmission to the host is
unsuccessful.
Enable Wedge (Handheld Scanner Mode)
This option will be checked if Wedge Only or Wedge & Store option is selected.
Keep Scan Data in KDC
This option will be checked if Store Only or Wedge & Store option is selected.