User's Manual

KDC User Manual SYNCHRONIZATION





5.1

KTSync Menu

KTSync was installed on your PC during the initial installation process. Before data may be uploaded

to any host device, KTSync must be launched on the host and configured to recognize the KDC. The

following screen displays when KTSync is launched:

File Menu

z Connect: This option displays the Serial port (COM#) assigned to KDC. You may also use this

option to manually assign the Serial port. The Serial port assigned to KDC may be found

under Windows Device Manager. The port assignment is used by KTSync for synchronizing

data from the KDC to the host.

z Synchronize: This option manually tells the KDC to synchronize data with the host. While

data is being synchronized, KTSync menu options are unavailable

Please do not use your computer during data synchronization.

z Bluetooth: This option is not available on KDC100/KDC500. Users may register a MAC

address to be directly connected by KDC20/30/200/250/300/270/350/400.

z Configuration: This option Enables users to set different KDCs with same settings by

exporting and importing settings from one KDC to the other.

z Exit: This option ends the KTSync program. You must re-run KTSync before you may

synchronize data on the KDC.

0QVG

Figure 17 - File Menu

Figure 16 - KTSync

Synchronizer Initial Screen