User's Manual

  8VHU0DQXDO
*QYVQVGUVFCVCVTCPUOKUUKQP  

TCP
Step 1. Wi-Fi Module Power ON
Turn on the Wi-Fi module’s power with “WIFI Config” -> “Power” -> “Enable”.
Step 2. Configure server information
ɂ
1
“WIFI Config” -> “Server” -> “IP Address” -> “192.168.X.XX”
ɂ
2
“WIFI Config” -> “Server” -> “Port Number” -> “XXXXX”.
ɂ
3
“WIFI Config” -> “Server” -> “Protocol” -> “TCP”.
* Obtain the PC’s IP address by opening the command prompt in the windows
and searching “ipconfig”