User's Manual

KDC350 User Manual
72
5.9 iPad/iPhone/iPod touch KTSync
The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for iPad, iPhone and
iPod touch users.
KDC200i/250i/300i/350i/400i and iPhone/iPad/iPod
touch connection instructions
1. The KDC200i/250i/300i/350i/400i supports “SPP” and “iPhone” Bluetooth profiles.
2. The iPhone/iPad/iPod touch should use “iPhone” Bluetooth profiles. “iPhone” is the default profile.
3. Download the KTSync program from the App Store.
4. Enable the iPhone/iPad/iPod touch Bluetooth power from the Setting > General > Bluetooth menu
[NOTE 1] Users have to disable MFi option in System > MFi menu to use HID Bluetooth profiles
[NOTE 2] Users have to RESET the iPhone/iPad/iPod touch to change “HID to iPhone mode” or “vice
versa” after removing previous KDC connection.
[NOTE 3] KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu.
KDC200i/250i/300i/350i/400i connection using iPhone
mode
1. Download and install iKTSync from the Apple App Store.
A. http://itunes.apple.com/us /app/ktsync/id372916602?mt=8
2. Press the two KDC side buttons together to enter menu mode
3. Scroll down to “Bluetooth” menu using KDC Down button
4. Press the front middle scan button
5. Scroll down to “Discovering” and press the front middle scan button
A. “Discovering Started …” message will be displayed on KDC screen
B. Discovering will take about 30 seconds.
6. Select discovered iPhone/iPod touch device name and press the front middle scan button
A. [Pin Code] User Default/Enter PinCode will be displayed
B. Press the front middle scan button to select the “Use Default” option
C. “Connecting to iPhone/iPod touch device name” will be displayed
D. iPhone/iPad/i Pod touch will ask for the PIN number.
E. Please enter “0000” and hit “connect” icon
F. “iPhone Connected” message will be displayed