User's Manual

KDC350 User Manual

5.2 File Menu

Connect to KDC

The KDC co nnects to a COM po rt automatica lly when con nected to your PC’s USB port. You can

manually assign the KDC COM port using KTSync

Connection submenu under File menu if

needed.

 The COM port assignment is found in the Windows Device Manager.

 KTSync

will not connect to the KDC if it is in KDC Menus. You must EXIT from the KDC

Menus.

 If KTSync

fails to connect automatically to the KDC, please follow these directions.

1. Exit KTSync

2. Check that you have connected the KDC to a USB port on your PC.

3. Make sure to use the cable provided with the KDC.

4. Check that the KDC is not in KDC Mode Menu.

5. Restart KTSync

NOTE: You can manually assign the COM port using KTSync

Connect option under the File

menu.

Synchronize

Under the File Menu, this option allows you to manually synchronize data on KDC with host. This option

is similar to clicking on the Synchronize button in the KoamTac Data Synchronizer box.

Figure 10 - COM Port Selection for KD