User's Manual

KDC350 User Manual
57
File Menu
 Connect: This option displays the Serial port (COM#) assigned to KDC. You can also use this
option to manually assign the Serial port. The Serial port assigned to KDC can be found under
Windows Device Manager. The port assignment is used by KTSync
®
for synchronizing data from
the KDC to the host.
 Synchronize: This option manually tells the KDC to synchronize data with the host. While data is
being synchronized, KTSync menu options are unavailable. NOTE: Please do not use your
computer during data synchronization.
 Bluetooth: This option is not available on KDC100. User can register MAC address to be directly
connected by KDC200/250/300/350/400.
 Exit: This option ends the KTSync program. You must re-run KTSync before you can synchronize
data on the KDC.
Settings Menu
 Synchronization: Select Synchronize options.
 Barcode & KDC: Select Barcode and KDC options.
 Others: Select Auto Connection and/or Synchronization Confirmation options.
Figure 7 – Setting Menu
Figure 6 – File Menu