User's Manual

KDC350 User Manual
51
button is depressed. The default setting is Disabled. NOTE: The host may have to open the COM port
before reconnecting with the KDC. Power on time determines the scan button pressing time to activate auto
power on feature.
4.4 PWR ON Time
The PWR On Time option works in conjunction with the Auto Power On option. Default value is Disabled. If
KDC Bluetooth power is off, us er can t urn on Bluet ooth power by press ing the sc an button for PWR On
Time option value.
4.5 Auto Power Off
The Auto Power Off option works in conjunction with the PWR Off Time option. This option allows the KDC
to power off Bluetooth aut omatically when the KDC is NOT CONNECTED to the ho st for the time durati on
specified in the PWR Off Time option.
The default for this option is Enabled. It is strongly recommended to keep it enabled to maximize the
operation time of the KDC. If Auto Power Off is enabled, Bluetooth can be manually powered off before
specified time in PWR Off Time option.
4.6 Beep Warning
The KDC beeps to acknowledge the status of the Bluetooth connection as follows:
1. One high short beep when Bluetooth is connected.
2. One low short when Bluetooth is disconnected.
3. Five short beeps if:
 “Beep Warning is ENABLED”
 “Auto Power Off is DISABLED”
 “KDC200/250/300/350/400 is DISCONNECTED from HOST”
 “Bluetooth power is ON”
4.7 PWR OFF Time
The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off is
Enabled, the KDC powers off Bluetooth when the time duration specified in the PWR Off Time option is met
and the KDC is NOT CONNECTED to the host. The time setting for this option is from one (1) minute to 30
minutes. The default is five (5) minutes.