User's Manual

KDC350 User Manual
48
3.6 Buffer Full
The KDC will display the message Buffer Full when the size of collected data reaches 60KB (85
version)/160KB(86 version) or the number of collected barcodes is 10,240. To prevent the loss of data, you
should synchronize the data then reset the memory when this message displays.
4MB version KDC reaches Buffer Full condition as follows:
 0.5MB Partition - Collected data size reaches 0.5MB or collected number is 25,600
 1MB Partition - Collected data size reaches 1MB or collected number is 51,200
 2MB Partition - Collected data size reaches 2MB or collected number is 102,400
 3MB Partition - Collected data size reaches 3MB or collected number is 153,600
 4MB Partition - Collected data size reaches 4MB or collected number is 204,800
3.7 Reset Feature
The Reset feature lets you restart the KDC if necessary without losing any stored barcode data or option
settings. To reset the KDC, follow these steps.
1. Press DOWN scroll button and SCAN button simultaneously for 5 seconds.
2. When the LEDs illuminate yellow, release the buttons.
3. The KDC initial screen, KoamTac Data Collector KDC displays when reset is complete.
Note:
The KDC stores collected data into flash memory and will not lose data or the KDC settings
during the reset process.