User's Manual

KDC350 User Manual
41
 NOTE: This Suffix option is different from the Suffix option in KTSync which appends the
suffix to data during synchronization.
 NOTE: User can also define suffix by scanning characters defined in Appendix C.18 ~ C.22
between following special barcodes
Suffix Enter Start
Prefix/Suffix Enter Finish
 NOTE: User can also delete or display current suffix by scanning following special
barcodes
Delete Suffix
Display Suffix
 AIM ID
- Allows you to add AIM ID to scanned data which can then be stored in KDC or wedged
to the host. AIM ID must be defined in data format menu of KTSync. AIM ID is either added to
the end of Prefix or Suffix.
 Partial Data
: Allows you to store and/or transfer partial data. User defines the start position and
number of characters to be stored and/or transferred.
 Select the x characters from y position
 Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to
Select
 Partial Data Length 0 means Select all characters from y position.
 Erase the x characters from y position
 Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to
Erase
 Partial Data Length 0 means Erase all characters from y position.