User's Manual

KDC350 User Manual
40
synchronized barcode information. This optional index would be added if data format is “Packet
Data” and
(1) 4 bytes index would be added before “@” when responding to “p” command
(2) 4 bytes index plus “@” character would be added after checksum byte if user scan a
barcode and wedging to the host
Data Editor
- KDC provides various data editing options.
 Prefix
- Allows you to add a prefix to scanned data which can then be stored in KDC or wedged
to the host. The Prefix format must be defined in the data format menu of KTSync. The
maximum length for a Prefix is 11 characters.
 NOTE: This Prefix option is different from the Prefix option in KTSync which appends the
prefix to data during synchronization.
 NOTE: User can also define prefix by scanning characters defined in Appendix C.18 ~ C.22
between following special barcodes
Prefix Enter Start
Prefix/Suffix Enter Finish
 NOTE: User can also delete or display current prefix by scanning following special
barcodes
Delete Prefix
Display Prefix
 Suffix
- Allows you to add a suffix to scanned data which can then be stored in KDC or wedged
to the host. The Suffix must be defined in the data format menu of KTSync. The maximum
length for a Suffix is 11 characters.