User's Manual

KDC User Manual

Revision 3.05.R6

Transmission of Check Digit. Please refer to 11. Appendix A – 11.2 Code Options for a

detailed explanation of each option.

3.3.3 Scan Options Menu



Scan Angle (Opticon model only): Allows you to configure the laser beam angle

to the barcode. There are two options for scan angle: Wide and Narrow. Wide is

and Narrow is 27

. The default is Wide.



Filter (Opticon model only): Allows you to change the Filter mode from Normal

to High for poor quality barcodes. The default is Normal.



Timeout: Allows you to set the interval between one scanning and the other. The

timeout options are from 5 seconds up to 10 seconds. The default is 2 seconds.



Minimum Barcode Length: Allows you to set a barcode length from 2 characters

to 36 characters. It is strongly recommended that you maximize the minimum

barcode length setting to prevent possible errors. The default minimum barcode

length of KDC30 is 4 characters.

Minimum (Default) Maximum (Default)

Symbology

Codabar 2(4) 60(60)

Code 11 1(4) 80(80)

Code 32

Code 39 0(0) 48(48)

Code 93 0(0) 80(80)

Code 128 0(0) 80(80)

EAN-8

EAN-13

GS1 Composit

I2of5 2(4) 80(80)

Matrix 2of5 1(4) 80(80)

MSI 4(4) 48(48)

Plessey 4(4) 48(48)

PosiCode 2(4) 80(48)

GS1 Omni

GS1 Limited