User's Manual

KDC User Manual Installation

2. On the host device, go to Settings -> Bluetooth, and select the KDC that needs to

be paired. The KDC and host device will now communicate with each other.

For PCI PTS compliance, KDC500 requires Numeric Comparison method.

3. After it has been installed, open KTSync and it will automatically find and connect to

the KDC. (Refer to 2.2 KOAMTAC Installation Wizard for more information about

installing KTSync).

Settings

Tap Bluetooth

Tap the KDC

Note

If the host device and KDC500 shows the same 6digit

number, press Pair/YES button on each device.