User's Manual

KDC User Manual SYNCHRONIZATION
132
Select Symbologies and Symbology Options
The process for scanning and reading barcodes is delicate and complicated. Although
your KDC is equipped with a high performance scan engine, if configured incorrectly it
may not perform at its peak performance level. To ensure its high performance, the
KDC comes configured to optimize its scan engine technology. Unless you clearly
understand the impact of your changes to the KDC settings, please do not change
factory default settings. Please refer to Appendix A for details. Pressing the Default icon
will reset all symbology related options to factory default settings.
Data Editing Option
Prefix - Enables the user to add a prefix to scanned data that may then be stored in
KDC or wedged to the host. The Prefix format must be defined in the data format menu
of KTSync. The maximum length for a Prefix is 11 characters.
This Prefix option is different from the Prefix option in KTSync that appends
the prefix to data during synchronization.
Suffix - Enables the user to add a suffix to scanned data, which may then be stored in
KDC or wedged to the host. The Suffix must be defined in the data format menu of
KTSync. The maximum length for a Suffix is 11 characters.
This Suffix option is different from the Suffix option in KTSync that appends
the suffix to data during synchronization.
AIM ID - Enables the user to add AIM ID to scanned data, which may then be stored in
KDC or wedged to the host. AIM ID must be defined in data format menu of KTSync.
AIM ID is either added to the end of Prefix or Suffix.
Partial Data : Enables the user to display and store partial data. The user defines the
start position and number of characters to be displayed and stored.
 Select the x characters from y position
 Set Partial Data Start Position to y , Partial Data Length to x, Partial Data
Note
Note