User's Manual

KDC250 User Manual
73
7. APPLICATION GENERATION
[NOTE] KDC FW2.85.200.x doesn’t supports the Application Generation feature. Users should
upgrade FW2.85.200.x to FW2.86.200.x to use Application Generation feature
When you select Application menu from the KTSync, you can choose from the following five Applications
– Generation, DB Lookup, Master/Slave, Pick/BIN, and Inventory. Users can also download saved
programs using Import & Download option.
When the Application tool is selected, the KDC will beep once to acknowledge a connection between the
KDC and the Application tool. KTSync would popup the following warning window if downloaded
application in KDC doesn’t match with KTSync application tool.
[Note] KDC would wedge barcode data to the host in application mode if “wedge and store always”
option in data process menu is selected and KDC firmware version is higher than 2.86.xxx.G.
Figure 22 – Application Menu
Figure 23 – Application Warning Window