User's Manual

KDC250 User Manual

10. Once the last PIN number is entered, press and hold the SCAN button for a few seconds. KDC will

display “HID connected” and the iPAD/iPhone/iPod touch will display “Connected” if paired

successfully

How to disconnect and reconnect HID mode using Up

and Down Button keys.

1. Users needs to select the option to use this feature in the BT Config > HID Control.

2. Press the DOWN button to disconnect the HID connection and bring a soft keyboard.

3. Press the UP button to connect HID

4. The BT toggle is a useful feature if users desire to use both the KDC and soft keyboard.

KDC200i/300i connection using iPhone mode

[NOTE 1] Users have to RESET the iPhone/iPad/iPod touch to change “HID to iPhone mode” or “vice

versa”.

[NOTE 2] KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu.

1. Download and install iKTSync from the Apple App Store.

http://itunes.apple.com/us/app/ktsync/id372916602?mt=8

2. Press the two KDC side buttons together to enter menu mode

3. Scroll down to “Bluetooth” menu using KDC Down button

4. Press the front middle scan button

5. Scroll down to “Discovering” and press the front middle scan button

A. “Discovering Started …” message will be displayed on KDC screen

B. Discovering will take about 30 seconds.

6. Select discovered iPhone/iPod touch device name and press the front middle scan button

A. [Pin Code] User Default/Enter PinCode will be displayed

B. Press the front middle scan button to select the “Use Default” option

C. “Connencting to iPhone/iPod touch device name” will be displayed

D. iPhone/iPad/iPod touch will ask for the PIN number.

E. Please enter “0000” and hit “connect” icon

F. “iPhone Connected” message will be displayed

7. Launch KTSync and configure Settings