User's Manual

KDC250 User Manual

6.8 iPad/iPhone/iPod touch KTSync

The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for iPad, iPhone and

iPod touch users.

KDC200i/300i and iPhone/iPad/iPod touch connection

instructions

1. The KDC200i/300i supports “SPP”, “HID” and “iPhone” Bluetooth profiles.

2. The iPhone/iPad/iPod touch should use either “HID” or “iPhone” Bluetooth profiles. “iPhone” is the

default profile.

3. Users can select the Bluetooth profile in the BT Config > Connect Device menu.

4. Download the KTSync program from the App Store.

5. Enable the iPhone/iPad/iPod touch Bluetooth power from the Setting > General > Bluetooth menu

Pair and connect KDC200i/300i and iOS4.0+ in HID mode

[Note 1] Users have to RESET the iPhone/iPad/iPod touch to change “HID to iPhone mode” or “vice

versa”.

[Note 2] KDC with Bluetooth Spec. 2.1+EDR stack doesn’t require 4 or 6 digits PIN digits entry

1. Go to the iPhone/iPad/iPod touch Bluetooth setting menu. Settings > General > Bluetooth

2. Change KDC connect device to HID from BT Config > ConnectDevice

3. Change KDC to pairing Mode

4. The iPhone/iPad/iPod touch will find a new device as “Keyboard”.

5. Click “Keyboard” device- the iPhone/iPad/iPod touch will ask for the PIN number. The iPAD will ask

for 6 digits and the iPhone/iPod touch will ask for 4 digits

6. As soon as the iPhone/iPad/iPod touch asks for the PIN number, KDC will display the PIN digits

selection menu. By default, it is 6 digits.

7. Press the scan button to select the 6 digit PIN code for the iPad. Press the side down button and

press the scan button to select the 4 digit PIN code for the iPhone/iPod touch.

8. The iPhone/iPad/iPod touch will display the PIN code that users should enter into the KDC.

9. By default the KDC displays pin codes 555555(5555). Users can change the PIN code by using the

side UP button to increase numbers, side DOWN button to decrease numbers, and the SCAN button

to confirm and move to next digit