User's Manual

KDC250 User Manual

3.7 Reset Feature

The Reset feature lets you restart the KDC if necessary without losing any stored barcode data or option

settings. To reset the KDC, follow these steps.

1. Connect the KDC to your PC.

z KDC100 - Connect to your PC directly using the swing out, Type A USB connector.

See Figure 7.

z KDC200 / KDC300 - Connect to your PC using the included cable, attaching the ultra mini

USB connector to your KDC and the standard, Type A connector to your PC’s USB port.

See Figure 6.

2. Press DOWN scroll button and SCAN button simultaneously for 5 seconds.

3. When the LEDs illuminate yellow, release the buttons.

4. The KDC initial screen, KoamTac Data Collector KDC displays when reset is complete.

Note:

The KDC stores collected data into flash memory and will not lose data or the KDC settings

during the reset process.

Figure 7 - Reset Function of KDC100

Figure 6 - Reset Function for KDC200 - KDC250 - KDC300

DOWN Scroll Button

Scan Button