User's Manual

KDC250 User Manual
31
Req. Addenda(Enabled/Disabled) N/A N/A N/A Disable
Sep. Addenda(Enabled/Disabled) N/A N/A N/A Enable
MSI Tx CheckChar(Enabled/Disabled) N/A N/A N/A Disable
PosiCode A and B/A&B LimitedA/A&B LimitedB N/A N/A N/A
A&B
LimitedB
GS1
UPCEAN Ver.(Enabled/Disabled) N/A N/A N/A Disable
GS1 Emulation(No Emulate/GS1 128
Emul/GS1 Emulate)
N/A N/A N/A No Emulate
PostNet Tx CheckChar(Enabled/Disabled) N/A N/A N/A Disable
PlanetCode Tx CheckChar(Enabled/Disabled) N/A N/A N/A Disable
Scan
Options
Scan Angle Narrow/Wide Wide Wide Wide N/A
Filter Normal/High Normal Normal Normal N/A
Time Out .5 seconds to 10 seconds 2 second(s) 2 second(s) 2 second(s) 2 second(s)
Min. Barcode Length 2 to 36 characters 4 chars 4 chars 4 chars N/A
Min. Barcode Length 2 to 48 characters N/A N/A N/A 4 chars
Security Level 1 to 4 level 2 level 2 level 2 level N/A
Auto Trigger Enabled/Disabled Disable Disable Disable Disable
Reread Delay
Continuous, Short, Medium, Long, Extra
Long
Medium Medium Medium Medium
Finger Trigger Enabled/Disabled Enabled Enabled Enabled N/A
Partial Display
Start Position 1 1 1 1
No. of Char(s) 0 chars 0 chars 0 chars 0 chars
Action Select Select Select Select
Data
Process
Wedge / Store
Wedge Only
Wedge & Store Always Default Default Default Default
Store Only
Save if Sent
Save if Not Sent
Data Format
Barcode only Default Default Default Default
Packet Data
Data Editor/Prefix Delete Delete Delete Delete Delete
Data Editor/Suffix Delete Delete Delete Delete Delete
Data Editor/AIM ID None/In Prefix/In Suffix None None None None
Data Editor/Partial Data
Start Position 1 1 1 1
No. of Char(s) 0 chars 0 chars 0 chars 0 chars
Action Select Select Select Select
Handshake Enable/Disable Disable Disable Disable Disable
Terminator None, CR, LF, CR+LF, Tab CR+LF CR+LF CR+LF CR+LF
Chk Duplicate Enabled/Disabled Disable Disable Disable Disable
BT Config
(200/250/300)
ConnectDevice
SPP N/A
Default
(200)
Default (250)
Default
(300)
HID N/A
iPhone N/A Default(200i) Default(250i) Default(300i)
Auto Connect Enabled/Disabled N/A Disable Disable Disable
Auto Power On Enabled/Disabled N/A Disable Disable Disable
Auto Power On/Power Off
Time
Disable, 1sec to 10second(s) N/A Disable Disable Disable
Auto Power Off Enabled/Disabled N/A Enable N/A Enable