User's Manual

KDC250 User Manual

2.2 Manual Installation

The KDC is equipped with one ultra mini USB port which is used to upload barcode data and to charge

the KDC battery. Prior to using the KDC, KTSync software and KDC device driver must be installed on

your computer. Using the USB cable included with the KDC, follow the directions below.

NOTE: If you have the KDC100, it has two ports, Ultra Mini and standard Type A which swings

out. See Figure 2 for more details.

Windows XP, Vista, and 7

1. Insert the KoamTac Installation CD into your computer’s disk drive.

2. Create a directory called KoamTac on your computer.

3. Copy XP.Vista.7 directory from KoamTac CD to KoamTac directory. The XP.Vista.7 directory

contains KTSync

programs for Microsoft

Windows XP, Vista, Windows 7 and user

manuals.

4. Connect KDC cable to ultra mini USB connector on the KDC.

5. Connect KDC cable to Type A USB connector on your computer. Wait until your computer

beeps and/or displays the message New Hardware Found. You will be prompted to search

for a device driver for KDC.

6. Browse then select KTReader.inf file from the KoamTac directory created in Step 2. Follow

screen prompts to continue with the device driver installation.

NOTE: KTReader.inf is the device driver for 32bit Microsoft

Windows XP, Vista, and

Windows 7. If you have a 64bit computer, use KTReader.inf file from XP.Vista.64bit folder

in the KoamTac directory.

Windows Mobile 5.0+

Please connect your Windows Mobile PDA to your computer before software installation.

z Create a directory and name it KoamTac on the PDA.

z Copy Mobile5.0_6.0 directory from KoamTac CD to PDA KoamTac directory.

z Mobile5.0_6.0 contains KTSync

programs for Microsoft

Windows Pocket PC 2003, Mobile

5.0, Mobile 6.0 Standard, and Mobile6.0 Professional. It also includes KDC User Manual.