User's Manual
KD C2 0 0 Use r M a n u a l
21
Selectdestinationofdata
User can save the collected data into a file or import to a Windows application.
User can select the target directory and filename by clicking “New” icon. “C:\MyData” is the default directory.
There are two options to import the collected data into a Windows application
z Import into Excel if “Microsoft Excel” is selected
z Import into user selected application if “Select from currently running application”
User should not operate the PC during the synchronization process. It can interrupt synchronization
process and will result in undesired behavior.
SelectSynchronizationMethod
There are two synchronization options that user can select.
Clear KDC200 memory after synchronization
User can clear the KDC200 memory after synchronization if this option is selected. KDC200 can store
maximum 10,240 or 200K byte barcode data. It is important to clear the KDC200 memory periodically to
prevent memory full status which will prevent user from storing additional data.
Automatically synchronize after connection
User can synchronize collected data with PC automatically by selecting this option. It is important to configure
other synchronization options properly before performing an automatic synchronization operation.
CurrentKDCWedgeMethods
This section shows current KDC200 Wedge/Store option under Data process menu. KDC200 can be configured
in one of the following three Wedge/Store mode
z Wedge Only – The scanned data is transmitted to the host. However, KDC200 wouldn’t store the
scanned data.
z Wedge & Store – The scanned data would be stored in KDC200 and transmitted to the host.
z Store Only – The scanned data would be stored in KDC200. However, KDC200 wouldn’t transmit
scanned data to the host.
z Wedge & Store if Sent: The scanned data would be stored in KDC200 if it transmits to the host
successfully