User's Manual
Chapter 3 Bluetooth
KDC200 supports a generic Bluetooth COM port and compatible with following Bluetooth stacks.
z BlueSoleil
z Broadcom (Widcomm)
z Microsoft Windows XP SP2, Vista and Mobile
z Toshiba
KDC200 may be able to connect to other Bluetooth stacks supporting SPP (Serial Port Profile) other than listed
above.
PowerOn/OffBluetoothPower
Bluetooth is very power consuming process and careful power management is required. It is strongly
recommend to POWER OFF
Bluetooth if KDC200 wouldn’t be used for an extended period.
AutoPowerOffBluetooth
User can Enable/Disable Auto Bluetooth Power Off feature in Auto PowerOff menu. The default is Enable and
strongly recommended to keep it Enable to maximize the KDC200 operation time.
If Auto PowerOff is enabled, KDC200 powers off Bluetooth if KDC200 is NOT CONNECTED
to the Host for
more than 10 minutes. User should Power On Bluetooth manually once Powered Off.
AutoPowerOnBluetooth
User can Enable/Disable Auto Bluetooth Power On feature in Auto PowerOff menu. The default is Disable.
If Auto PowerOn is enabled, KDC200 powers on Bluetooth if KDC200 Bluetooth power is off and user triggers
scan button. Host program may have to open COM port again to reconnect to KDC200.