User's Manual

KD C2 0 0 Use r M a n u a l
15
Reset
User can reset KDC200 as follows:
z Plug KDC200 USB connector to PC USB port.
z Press lower menu button and scan button together for 5 seconds.
z Release lower menu button and scan button once LED becomes yellow.
z Initial screen (“KoamTac Data Collector KDC200”) is displayed once reset.
z KDC200 stores collected data into flash memory and wouldn’t lose the data during reset process.
ReplacingBattery
User can purchase new battery from local distributor and replace the Li-polymer rechargeable battery as
follows:
z Disassemble back cover (Unscrew middle screw only)
z Replace battery and assemble back cover