User's Manual
KDC200Menus
User can access menu selection mode by pushing both buttons on the left side of KDC200 simultaneously. The
table below summarizes KDC200 menus. Please refer to Chapter 4 for the details of each option.
User should set KDC200 optional parameters properly for the best scanning result.
z Set proper security level. To increase the reliability ,user can set the security level to a number higher
than 1 (the default value) up to 4. If the security level is n, then the decoder will keep reading the
barcode until it decodes the same value n times.
z Select only necessary barcodes to increase the reliability further.
z Maximize the minimum barcode length. Small barcode length such as 2 or 3 can result in some errors.
Level 1 Level 2 Note
View Data Delete Review and delete stored data
EAN13 Enable/Disable Symbology
EAN8 Enable/Disable Symbology
UPCA Enable/Disable Symbology
UPCE Enable/Disable Symbology
CODE39 Enable/Disable Symbology
ITF14 Enable/Disable Symbology
CODE128 Enable/Disable Symbology
I2of5 Enable/Disable Symbology
CODABAR Enable/Disable Symbology
EAN128 Enable/Disable Symbology
CODE93 Enable/Disable Symbology
CODE35 Enable/Disable Symbology
BooklandEAN Enable/Disable Symbology
EAN13withAddon Enable/Disable Symbology
EAN8withAddon Enable/Disable Symbology
UPCAwithAddon Enable/Disable Symbology
Set Barcodes
UPCEwithAddon Enable/Disable Symbology
CodaBar_NoStartStopChars
UPCE_as_UPCA
(Bar)Code Options
EAN8_as_EAN13