User's Manual
KD C2 0 0 Use r M a n u a l
9
BasicOperation
Readingbarcodes
Point KDC200 to the barcode and press the scan button.
A high beeper tone will be heard and the front panel LED will illuminate in green upon a successful scan.
A low beeper tone will be heard and the front panel LED will illuminate in red upon an unsuccessful scan.
The scanned barcode will be displayed, along with barcode type and time stamp.
When the barcode cannot be read, try the following:
z Check if the width of barcode label does not exceed the width of the light beam.
z Change the angle between the barcode and KDC200.
z Change the distance between the barcode and KDC200.
z Check option settings defined in KDC200 menu section.
UploadbarcodedatatoPC.
Use the included Synchronization program to upload barcode data from KDC200 to your PC. Please refer
Chapter 3 for the details of Synchronization process.