Quick Guide

KDC185
QuickGuide


SeeReferenceManualformoredetailedinformation
Visitstore.koamtac.comtopurchaseadditionalKDCsandaccessories.   
QG_KDC185_20220303p7
InAlways‐pairingmode,anapplicationcanconnecttoaKDCwithoutreadingapairingbarcode,sotheconnection
procedureisalittledifferent.
a) IntheKTSyncapp,taptheConnecticonatthebottomleftoftheapp.
b) InKTSync,tap“STARTBLESCANNING”inthetopright.
c) InKTSync,checkthelistoffounddevices.
d) InKTSync,taptheKDC185listedbyserialnumberinbracketsfollowedby[BLE]thatmatchestheserialnumber
foundonthebacksideoftheKDC185.Theformatwilllooklikethis,KDC185[xxxxxx][BLE],wherexxxxxxisthe
serialnumber.
e) TheKDC185willbeepuponconnectionanddisplay“BLESPPConnected”onitsscreen.Nowitisreadytouse.

<Fig.4>
