Quick Start Guide

Terminal black
screen
terminal power
supply abnormal
1.Check the battery power and
installment;
2.Connect the adapter with the POS
terminal, and check if the machine
can boot normally;
3. Replace the battery.
Terminal hints
out of paper
IC card damaged
or network is not
connected
1.Change the card and retry
2. Check whether the network signal
is available.
Transaction
failed
No available
printing paper
1.Replace printing paper
6
7
8
10
9
12
13
11
The company reserves the right to amend the contents
and specifications of the instructions, and will not inform
when modification to be made. Due to product updates
and improvements, certain details of this document may
be inconsistent with the product, and the physical product
shall prevail.
V72 POS terminal
Battery
Power adapter
USB cable
Printing paper
Quick start guide (with Warranty card)
Certification
*Stylus
The installation and use of this product must strictly abide by the
guides of this instruction.
Unauthorized disassembly of the device will destruct the built-in
security key, which will lead to that the device cannot be used.
Do not drop, impact, scratch, distortion, strike, vibrate this
device or place heavy objects on top of it.
Do not use sharp objects to contact and collide the device,
especially the Display, or it may cause damage to the screen or
abnormal Display.
Use soft, moist and bare face fabric to wipe the screen, to clear
the fingerprint, do not use corrosive cleaning agent.
This product must be used in conjunction with special
accessories, avoid the use of other non-special accessories,
otherwise it may lead to device failure or even serious damage.
This device is electrical product, never spill any liquid substance
into the device, otherwise, there is the risk of severe damage of
the device caused by internal short circuit.
Don’t insert any metal object into the interface of the device; it
may cause serious damage to the device.
Please avoid placing this device in direct sunlight, high
temperature, humid or dusty environment.
If the power line is found damaged or fault, the user should
immediately stop using the device and cut off the power, and
then contact the related after-sales service department; the user
open the device for repair without permission is strictly
prohibited.
Statement: Safety Precaution:
Operation Instruction:
Contact IC card:
Barcode scanning:
Magstrip card swiping:
Trouble shooting:
Product Description:
Quick Start:
Packing List:
Reason analysis Elimination methods
Fault
Phenomenon
If the fault cannot be resolved, please contact the customer service.
Take out the POS terminal, printing paper, battery, power
adapter, wrist strap and other fittings from the box, and
quickly install by the following sequence.
1.Install printing paper:
①Lift the cover of paper warehouse and open it
②Unfold print paper roll, hold on one end of paper and install
the paper roll into warehouse in the direction shown below,
then left certain paper out of the scudding knife.
③Snap the cover into place, which would emit an audible click.
2.Install SIM/PSAM cards:
① Take off the battery cover
② Push SIM/PSAM card into slot as the silk-screen instructed
3.Install and disassemble
battery:
Install the battery：
① Take off the battery cover
② Plug the battery contactor into
the white socket
③ Place the battery into bunker
④ Snap the cover
Reading skills:
① The closer the scanning port is to the bar code, the smaller the
aiming beam; the scanning port farther away from the bar code,
aiming beam is bigger. If the bar code is small, the scanning port
should be close to the bar code; while a big bar code should keep a
lager distance with the scanning port, this can help you easier fetch
the barcode.
② If the bar code is highly reflective, you may need to scan at an
angle to read the bar code successfully.
Disassemble battery：
① Take off the battery cover under power off status
② Slightly lift the battery to a certain height
③ Press the locker in white socket, pull the plug up, then the
battery can be taken out
[Attention]
pay attention to the paper roll direction while installing thermal paper. Be sure that
paper roll is fixed with the direction towards down, as shown below. Otherwise words
shall not be printed.
[Attention]
1）Install and disassemble SIM/PSAM card only on the
condition of machine powered off, or it may cause card
damage;
2）Be sure chip facing internal direction of machine when
install SIM/PSAM card;
3）Don’t attach any item, which will increase the card
thickness, like sticker and tag, to the SIM/PSAM card, lest the
failure of installment and disassembly.
⑧ DC/DEVICE/ HOST
⑦ Contactless induction area
12 PSAM Card
② Display screen
③ Indicator light
④ Keypad
Battery
⑤ Mag-stripe card swiping slot
⑥ IC card slot
10 Barcode scanner
① Printing paper outlet
⑨ Stylus
The outlet for the printed receipt
4-color indicator light provide direction for operation status,
which may change in response to different application
configuration
Mag-stripe card swiping position, bidirectional
Contactless IC card read-write induction area
Power on and off, input amount and code, confirm and
cancel transaction etc.
TContact IC card inserting position
USB Type-C; charge; download app from other devices,
such as computer; Connect USB devices to download app
Optional 1D/2D code scanning
Display transaction and operation tips information etc.
*optional touch screen, support e-signature
Printing paper outlet
Indicator light
Display screen
Keypad
IC card slot
*Stylus
Quick Start Guide
V72 Wireless POS Terminal
Power on: short press the power key " " for 3 seconds
under power off status, the screen lights up means power
on.
Power off, standby, reset: Press the power key " " for 3
second under power on status, then the screen displays “1-
standby”, “2- power off ”, “3- reset”. At this moment, press
number key “2” can shut down the machine; press “1” will
quickly switch the machine to sleep state, which can be
awakened by power key" " ; while press “3” can reset the
machine.
[Attention]
① When operating transaction, please do not turn off the machine for fear shutting down
communication.
② The machine cannot standby when connected with external power.
11 SIM Card
10
9
8
7
6
5
4
3
2
1
Component Name Quantity
Name Function Introduction
* Optional fittings, shall be subject to order request.
* Optional fittings, please in kind prevail.
Mag-stripe card
swiping slot
Contactless
induction area
DC/DEVICE/ HOST
*Barcode scanner
Paired with the machine equipped with touch screen, for the
E-signature operation
Power on/off, standby, reset:
Please swipe the card in the magnetic track when the
magnetic strip of the card facing the device; bi-directional
swiping is feasible; keep steady and constant speed when
swiping. As shown below:
IC card slot is configured on the bottom of the machine;
keeping the IC card chip upward, insert the card into slot
and push to the end; keeping the IC card inside the card
reader during the whole transaction process, for pulling
out arbitrarily may lead to transaction failure or chip
damage. As shown below:
When the screen displays ‘please scan’, please move the
light beam projected from scan port onto the central bar
code, and then an audible beep means that the transaction
is complete.
[Attention] Damaged magnetic strip or improper card swiping may lead to transaction failure.
Contactless card:
When use contactless card, please place the contactless
IC card close to the central Printer cover, and stay for
about 1 second. When it beeps and hints the card swiping
succeed, move away the card. As shown below:
E-signature (optional):
When the screen display “ Please sign”, please guide
customer to sign in the blank area by the customized
stylus; after that, pressing the enter key means complete
this operation, while pressing the cancel key will exit this
operation.
[Attention] when the screen contactors misaligned, please contact the maintenance
personnel to recalibrate.
[Attention] please fully charged the machine if long time no use.
[Attention] Chip contactor damage or
oxidation may lead to transaction failure.
Warranty Card
Thank you for purchasing our products!
The warranty period of this product is subject to the
warranty period of the contract, from the date of
purchase (based on the date showed on the receipt).
After the warranty expiration, we still provide the
life-long maintenance. We usually require a payment
once for a certain maintenance and spare part costs
from our customers. Then we will provide the life-long
maintenance to our customers with extraordinary
quality.
When you need to require a repair or a maintenance
service, please fill out the "product failure report form"
and send the form along with the warranty card back to
us.
The warranty card is a necessary certification of the
Company's warranty service. Please keep it safe and
will not be reissued.
User phone
User name
Contact person
Address
Zip code
Date of purchase
Fault description:
Serial number
Official seal:
Please cut along with dotted line
The pictures and descriptions in this guide are for reference only, please prevailin in kind.
Address: 3/F, No.2 Building, Aisino Information Park, No.18 A,
Xingshikou Road, Haidian District, Beijing
Zip code: 100195
Email: [e-mail]
Manufacture name: Vanstone Electronic( Huizhou) Co.,Ltd
Manufacture Address: 4/F, No.12 Building, Aerospace Science and
Technology industrial Park, No.51,Zhongkai Road, Huizhou
Http://www.vanstone.com.cn
Battery
Ripping printed paper:
Holding the paper stretched out, ripping that along the
direction shown below (from left side to right side). Keep
strength equal and quick during this process.
Charge:
Connect USB cable to the power adapter, plug the input
end of adapter to the AC outlet, and plug the DC output of
USB cable to the “DC/DEVICE/HOST” port opened in the
left side of POS terminal. After connected to electricity, the
machine will display the charging progress. It will take 3
hours for the machine to be fully charged.
Vanstone Electronic (Beijing) Co., Ltd.
Vanstone Electronic (Beijing) Co., Ltd.