Installation Instructions

9
Gertraudenstraße 10-12, 10178 Berlin
Email: [e-mail]
Phone: [phone] V1.0
9
The first step is to identify the ideal mounting position on the machine. As we are
measuring the vibration of the machine and we rely on very good transmission of the data it
is not recommended to attach the sensor anywhere on the machine. Ideally, if a probable
failure location is known, it is recommended to place the sensor as close as possible to it.
Steps
1. Identify the best monitoring position on the machine
2. Start by cleaning the surface of your machine with the cleaner and the cloth. Be sure
no dirt is remaining
3. Sand the surface to improve the mounting process and then clean the surface again
from sanding residuals
4. Carefully slide out the protective metal ring from the magnet with the help of pliers
5. Apply the Aion on the previously prepared surface
For additional information regarding the mounting of Aion, please contact AiSight.
Safety Precautions
The magnet on the back of the Aion is very strong, and it is mandatory to
take exceptional care with handling it in the vicinity of magnetic surfaces and
the user's fingers.
!