Installation Instructions

5
Gertraudenstraße 10-12, 10178 Berlin
Email: [e-mail]
Phone: [phone] V1.0
5
2. Proper Handling
Proper handling of AiSight Aion Sensor Node is critical to prevent any damage.
The following hazard situations should be avoided:
● To drop the item
● Hit the item against sharp or hard surfaces
● Touch the pins of the connector of the Aion connector or its power supply with any
metal tools or conductive devices
● Use excessive force when mounting the unit
● In case of the use of magnet accessory:
● avoid impact (due to magnetic attraction) when mounting the sensor on the
desired surface.
● do not put any operator body parts between the magnet and metal surfaces
● In case of use of swivel mounting, force the mounting without the presence of a
thread
● Expose the item to temperatures above 90°C
● Expose the item to any reactive chemicals
● In the case of using the power cable instead of the power supply, only trained
electricians can handle the installation of the cable
The user’s Environmental, Health, and Safety (EHS) manager has to be consulted to ensure
a safe installation of the sensor. The technicians who are responsible for the installation must
follow all EHS guidelines, use the required Personal Protective Equipment (PPE) and use the
proper and indicated tools.
For adhesive mounting options, the cure time must be respected before the operation of the
machine restarts.
The power supply cable or the power cable alone must be securely tied to fixed parts of the
body of the machine, cable trays, or ducts. It's suggested to use cable ties, clips, and clamps.