Installation Instructions

17
Gertraudenstraße 10-12, 10178 Berlin
Email: [e-mail]
Phone: [phone] V1.0
17
Figure 4.8. Screen confirming the connection of the sensor with the Wi-Fi.
By clicking on the OK button, the user can start the provisioning process for the next
sensor node in range.
The sensor node should now change its colour to yellow as soon as connected to the Wi-Fi
and shortly after turning green confirming the connectivity with our platform in the cloud, as
shown in Figure 4.9. If the node stays with the yellow LED on, the network requirements
presented at the beginning of this document must be reviewed.