Installation Instructions

13
Gertraudenstraße 10-12, 10178 Berlin
Email: [e-mail]
Phone: [phone] V1.0
13
3.3. Connecting
This session describes the requirements and steps for provisioning the sensor node.
3.3.1. Required parts
● Aion Sensor Node
● AC Power Supply or 24V Power Cable
● Apple Iphone or Ipad with enabled bluetooth connectivity
● Provisioning Application (App) provided by AiSight
● Wi-Fi router with internet connection or Wi/Fi cellular gateway
3.3.2. Sensor Node Overview
● Protocol: IEEE-802.11B/G/N (802.11N up to 150 Mbps).
● WPA, WPA2, WPA2-Enterprise (soon) and WPA3 (following months).
● Frequency range: 2412 to 2484 MHz (2.4 GHz).
● Integrated antenna: Able to connect to routers/gateways up to 30 meters away.
3.3.3. Wi-Fi Requirements
In order to a successful connection of Aion with the cloud, the following requirements
must be met.
● Robust access points with high performance features (e.g. MU-MIMO - multi-user,
multiple-input and multiple-output)
● DHCP and network configured for an appropriate topology (e.g. correct subnet size,
VLANs, etc.)
● Network must able to handle communication over MQTT protocol (TLS1.2)
3.3.4. Provisioning
Connect the sensor node to the power supply (TRE25240) or to the 24V power cable.
Make sure the plug is securely tightened to the sensor connector. Once Aion has a blue
steady LED light, as shown in Figure 4.5, it is ready to be provisioned using the app.