Technical data

”””    Page 53
LAN Configuration
Launch PXE OpROM
Use this option to select Enabled or Disabled (Default) option for Legacy Network Devices.
LAN Wake Up
This field specifies whether the system will be awakened from the S5 .power saving mode when activity or input
signal of onboard LAN is detected.
The choice: Enabled (Default), Disabled
Fig.6-26 LAN Configuration
W83627UHG Super IO Configuration
This System is using Super IO Chip: W83627UHG there are Port1~port4 COM port for selection.
When you select Port 1,2,3 or 4, the relational contents are as below
Serial Port (Selectable COM port mode through BIOS)
Enable (Default) or disable Serial Port (COM).
Device Setting IO=3F8h IRQ=4
Mode Select for COM port (COM1 & COM2 only) mode RS-232 (Default), RS-422 or RS-485.