Technical data

”””    Page 34
6.1.3 Insert Memory module
The Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99, is fully integrated at
system assembly line before shipment. It’s not necessary for end users to do any assembly unless installing the
optional HDD, RAM, CF and Power Input. Installation of these optional components is described below.
1. Unscrew the IPC back cover to detach it
2. Remove the IPC back cover
3. Insert Memory module to the slot.
4. Press down the Memory module and finish.
Figure 6-2: Installation of Memory