Technical data

”””    Page 28
*
Fig.6-1: Top-side Jumper and Connector Locations
Connector
Description
Remark
Jumper Setting
JP1
CMOS Setup
JP2/J3
COM3 Pin 9 Function Setup
JP4
LCD Panel Voltage Setup
JP5
COM2 Pin 9 Function Setup
JP6
LCD Panel Inverter ON/OFF Signal Setup
Connector
J1
Compact Flash Type II Connector
J2
Case Open Detect Connector (1*2 Pin wafer/2mm)
J3
LPC Debug Card Connector (2*5Pin cut Pin 9 Header /2.54mm)
J4
GPIO Connector (2*5 Pin Header/2mm)
J5
Power output Connector for SATA device (1*3 Pin wafer/2.5mm Right Angle)
J6
SATA Port 1 Connector (Single Right
Angle)
J7
USB Port 2~3 Connector (2*5 Pin Box Header/2mm Right Angle)
J8
USB Port 4~5 Connector (2*5 Pin Box Header/2mm Right Angle)
J9
COM3 (RS
-232) Connector (2*5 Pin Box Header/2mm Right Angle)
J10
Mini-PCIe Connector
J11
COM4 (RS-232) Connector (2*5 Pin Box Header/2mm Right Angle)