Technical data

”””    Page 25
5.6 Rear View
Fig.5-25: Rear side of the system ( shown as 10.4” IP10IA99)
1
Front panel of the system with seal at the
rear side
5
Screws that secure the cover on the rear
side
2
Mounting clamp and Allen Screw for
mounting to a sub-frame
6
Interface side
3
Label of IPxxIA99 product designation
7
Enclosure of the display
4
Threaded hole [marked red in the picture
only (4x for mounting the VESA® 75/100
compliant, adapter plate); refer to the
“VESA® Mounting Plate (Optional)”]
8
Cover that obstructs the access to the
CF
-slot
9
Cover
5.7 DC or AC Power Connection
The Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99, can be connected to
a DC power source via a DC power cable (included) and optionally to an AC power source via an AC/DC adapter (not
included).