Technical data

”””    Page 21
Table 5-2: Control indicators of the system
OIC
(Operator Interface Computer) 10"/15"/17”
NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99
Power Button (on the front panel)
available
Power LED (on the front panel)
available
Power LED (on the rear bottom side)
available
Table 5-3: System status
The system is
connected to a
DC power source
Power Button
(front)
Power LED
(front)
Power LED
(rear bottom)
Status of Panel System,
IP10IA99 / IP15IA99 /
IP17IA99
10"/15”/17”
Off
orange (standby)
orange (standby)
The system is in standby.
On
green
green
The system is running.
Fig.
5-17-1: Close-up on front panel
of
10"/15”/17”, Power button and
LED
as power indicator on the lower
right front side of the unit.
Fig.
5-17-2: Close-up on I/O of 10"/15”/17”,
Power LED and Reset button on the bottom (rear
side) of the
unit.
Fig.
5-18 Adjust the switch to the left position to enable the PWR button on the front bezel. It’s a
protective mechanism.
Hints for DC power connection:
The DC power source should be able to be switched off and on via an isolating switch.
The unit is only completely disconnected from the DC main power source, when the DC power cord is
disconnected either from the power source or the unit. Therefore, the DC power cord and its connectors
must always remain easily accessible.
Hints for AC power connection via the optional external AC/DC adapter (not included):
The main power cable of the external AC/DC adapter serves as disconnecting device. For this reason the