Setup guide

131
Installation
FLEXIBLE INSTALLATION
EASY INSTALLATION
EASY TRANSPORTATION
Long piping length & large drop
q Total refrigerant piping length.
q Max. 300 m refrigerant piping length.
q Max. 50 m height drop between indoor and
outdoor units (outdoor unit above, 40m if
outdoor unit below).
q Max. 15 m height drop between indoor units.
Concise system
Comparing with chiller system, without lter,
stop valves, accessory, FlowLogic II units
refregerant piping greatly reduce the system
installation work and save a lot of protection
& clean work.
Wiring system
A wiring system is used to enable shared use of
the wiring between indoor & outdoor units and
the central control wiring, with a simple wiring
operation. The only work you need to do is to
connect the central controller to the outdoor
unit directly if central controller is adopted.
Modularized design
The outdoor units’ space only occupies 0.74
m
2
and 1.04 m
2
, it can transport with elevators,
save lots of transport cost and time.
The outdoor units can be installed in different
oors, sace the whole system test time.
VRF