User's Manual

Hint: in-air mode, slightly press the sliding plate

While moving the sliding plate, you should put your thumb flatly and just lightly

press the sliding plate. Note: when over exerting or over bending your thumb it may

cause hand pain.

a) For most users, it is suggested to set the cursor speed to low speed

(factory default setting). If you think the cursor moves too slow, you can

use the shortcut keys (for the setting method please refer to shortcut

keys function instructions number 5) or enter to the system desktop

control to increase the speed to middle or high.

b) While pressing the left or right button and the scrolling wheel, your thumb

should press down the sliding plate to ease an upwards movement of the

index finger or the middle finger, also to ensure that the sliding plate

position won’t change.

8-3 Function Mode of Shortcut Keys

The 10 shortcut keys have four different function modes: presentation,

website/e-mail browsing, multimedia and special function keys. Four LED

indicators are used to display the selected mode (see illustration below). By

clicking in mode key, the mode indicators will switch one by one in the

sequence of presentation, website/e-mail, multimedia and special function

keys.

(O) (X)

(b) (a)