One Ran Series System Installation Marital Jl A i rWa [ k : eee EL ETE 5.3 One Ran IPC Cable {Inter-Processor Communications rink) The IPC cable is normally installed di the factory, but may require installation in the field as show ir Figure 54. The connectors (BTS MMI &BSC MMi) sre laminated on the'main unit front panel (being the filer DAR. Liz only the. cable Supplied with he: (P-RAN.
One Ran Series System installation Marva fy A i r'W. Giminunisahdnie ie 5.7 Power Supply Interconnect Wiring [DC Powered Models] Systems equipped for BC operation include a separate DC distribution unit (EUTERPE which provides DC power distribution and aver diet protection for connected equipment, The: RPS also provides voltage and centime interments miters oh the frontal. An RPS can support Up to I Lutenists and therefore caf bested on both Omi and Boater DC powered configurations.
Monera Series System Installation Manual Concomitant ar item in PE Franny Figure:5:10 GPE Antenna Cable Wiring 5.9 Optional DC Output Connection [DC Models ONLY] One Ran IP-RAN DC powered models are equipped with:an optional +12 VOC output connection which cane used fo power local transshipment as a smell Ethernet switch furor, Maximum available 12V output current from this connection: is 3A. The capability is provided because 4 local Ethernet switch is.
