Installation Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 22 of 56 6/14/2006
5.2 Component LED Configuration
CDPB: LED status indicators are provided on the AW-96 CDPB module. LED functions
are described in the following pictures and tables.
CPIB
GPSR
PCPM
SCPM
CDPB PWR FLT
BTS
MMI
BSC
MMI
RESET
CPIB PCPM SCPM
Figure 5-9 CDPB Panel Diagram
Figure 5-10 - CDPB Panel Photo
Name Color On Off Note
1 CPIB Green Normal Abnormal CPIB power on/off indicator
2 GPSR Green Normal Abnormal GPSR power on/off indicator
3 PCPM Green Normal Abnormal PCPM power on/off indicator
4 SCPM Green Normal Abnormal SCPM power on/off indicator
5 CPIB Orange Abnormal Normal
Check function of CPU in CPIB
Board and ALARM
6 GPSR Orange Abnormal Normal GPSR alarm on/off indicator
7 PCPM Orange Abnormal Normal
Check function of CPU in
PCPM Board and ALARM
8 SCPM Orange Abnormal Normal
Check function of CPU in
SCPM Board and ALARM
Table 5-1 – CDPB Indicator Codes
NOTE: AW-96 / AW 10 models are NOT normally equipped with an SCPM (Secondary
Call Processor Module), therefore these indicators are not used in most system
applications.
XCVB: The XCVB module is equipped with 2 indicators. LED functions are described in
the following pictures and tables.