User's Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 56 of 72 6/14/2006
Figure 10-11 - PN Check Screen
10.3.2.9 Test Case #9 – System Interface Check
10.3.2.9.1 Test Procedure
• Command: Ping
Send Ping Command to the Following system IP Addresses
1. WPM (Wireless PBX Manager)
2. PDSN (Packet Data Serving Node)
3. CA (Call Agent)
4. MG (Media Gateway)
5. SG (Signal Gateway)
10.3.2.9.2 Expected Result of Case #X
A successful PING command response from each system.
10.3.3 Operation Tests
These test cases are designed to determine if AW 96 is ready for production testing.
10.3.3.1 Test Case #1 – Voice Calls
10.3.3.1.1 Test Procedure
Test Call From MS #1 to MS #2.
Test Call From MS #1 to Landline Phone #1.
10.3.3.1.2 Excepted Result of Case #1
1. 2
nd
MS Rings and call is answered