User's Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 49 of 72 6/14/2006
Section Description Reference
3
6.1 RF Cable - AW-96 to RU
Figure 6-1
Use RF cables
supplied with
AW-96.
6.3 Ethernet Cable – AW-96 to RU Figure 6.4
Table 7-1 - Internal System Cable Reference
10.2.3 External System Connections
5
To install new internal connections refer to the Section and Figures in the following Table
for proper cable installation.
Section Description Reference
3
6.1 External Diversity Antenna System Figure 6-2
6.2 Electrical Power Cable
Figure 6-3
Use AC power
cables supplied
with AW-96.
6.3 External BSC & BTS Ethernet Cable Figure 6-4
6.4 External GPS Antenna Cable Figure 6-5
Table 7-2 - External System Cable Reference
10.2.4 Connect Power to Cabinet
Connect -48VDC to DC distribution panel (if applicable).
Connect 120VAC or 240VAC to Rack AC distribution panel (if applicable).
10.2.5 Connect Communications Facilities
Connect LAN Facilities to BSC
Connect LAN Facilities to BTS.
5
WARNING: Make sure all system power supplies are turned off. All
breakers/Fuses are pulled on all main and intermediate panels. Then proceed with
the Installation.