User's Manual

Note that the available channels differ from country to country, and the channel

number must be the same between the entries/stations within the range, so that each

can communicate with each other.

To let the new configuration take effect, please choose Apply.

On the other hand, while in the Access Point mode, you will find the channel number

is the same as the associated access point. Thus, there’s no need to manually set the

value.

The Domain Tab

While in the 2.4GHz range, the network operation may differ from country to country,

or domain to domain. This is because the 802.11d protocol was established. To have

the operation normally processed, choose the Domain tab to change relevant settings.