User's Manual
21
Present under the Value field will disable the value options of specified property.
The following texts explains the four properties in the Property list displayed by this tab, which are
important and effective when operating the stick.
Authentication TYPE
Specify a pre-defined profile with standard parameters from here. The provided profiles include:
Based on WEP setting (Auto switching) – switch automatically between Must use
Shared with WEP (Share key) and WECA Compliant (Open key) for better security
without missing any possibility of networking connections.
Must use Shared with WEP (Share key) – limit the connection permission only when
the devices communicate with same WEP keys. This provides a higher security.
WECA Compliant (Open key) – open for all connective networks to access. This is an
option of less security.
Configuration Profile
Specify a pre-defined profile with standard parameters from here. The provided profiles include:
B only – for operation in 802.11b environments only
B WIFI – for operation in 802.11b environments conforming to WiFi specifications
G only – for operation in 802.11g environments only
Mixed – for operation in either 802.11b or 802.11g environments
Mixed Long – for long-range operation in either 802.11b or 802.11g environments
Test – for operation under the widest variety of 802.11 conditions
Nitro Mode
This feature may increase data throughput over the WLAN and is particularly effective in mixed
802.11b/g environments. This property determines whether Nitro mode is enabled in your
wireless USB Stick.
Power Save Mode
This property turns the Station Power Save feature on or off, or sets it to Auto. When in Auto
mode, the station enters Power Save based on the battery condition (XP only) on the host.
Power Save Mode decreases the amount of power consumed by the adapter by powering off
the radio for short periods. Enabling Power Save Mode trades off performance for battery life.
Auto Dynamic – specifies Disable mode when on AC power and Dynamic mode when
on battery
Auto Maximum – specifies Disable mode when on AC power and Maximum mode when
on battery