User's Manual

11
Choose Wireless Radio On command to receive the radio frequency signals.
Wireless Radio Off
Choosing Wireless Radio Off command will stop receiving the radio frequency signals.
Remove Status Icon
If you do not wish to have the WLAN-54G USB Configuration Tool icon displayed in the system
tray, please choose this command. Therefore, once the computer is rebooted, the icon will
reappear. Clicking Start on the taskbar, choose Program from the menu, and then point to
WLAN-54G USB Configuration Tool in the submenu of WLAN-G TOOLS can also launch the
utility anytime.
Wireless Network Status
Choose this command to launch the Status tab of the Wireless Settings dialog box. For more
details about the tab, please refer to The Status Tab in the Configuration Tool Basics section
below.
Advanced Configuration
Choose this command to launch the Configuration tab of the Wireless Settings dialog box.
Please refer to The Configuration Tab in the Configuration Tool Basics section below to gain
more information about this tab.
WEP Encryption
Choose this command to launch the Encryption tab of Wireless Settings dialog box. This tab
offers you a number of options to maintain the secure management in a wireless LAN environment.
See the explanations in The Encryption Tab under the Configuration Tool Basics section below
for more details.
IBSS Channel
Choosing this command will launch the IBSS tab of the Wireless Settings dialog box. To obtain
more information about this tab, please refer to The IBSS Tab in the Configuration Tool Basics
section below.
Version Information
Choosing this command will launch the About tab of the Wireless Settings dialog box. The About
tab reveals general information on your 802.11g WLAN USB STICK, including the release version
of driver, the WLAN-54G USB Configuration Tool and the USB network adapter’s MAC Address.
3.3 Configuration Tool Basics
When you double-click the WLAN-54G USB Configuration Tool tray icon, the Wireless Settings
dialog box will be prompted as the picture shows below. You may also launch this dialog box via
clicking Start on the taskbar, choosing Program from the menu, and then pointing to WLAN-54G
USB Configuration Tool from the submenu of WLAN-G TOOLS.