User's Manual

M061703V10

6. When finished, open the Device Manager window again to verify if the installation is

approved. The yellow exclamation mark shall be removed for this time.

Upgrade WLAN PRISM3 IEEE802.11b and the Stick’s Driver

To upgrade the drivers for WLAN PRISM3 IEEE802.11b and the 802.11b Wireless LAN USB Stick,

follow the procedures below. Please note that the details might be slightly different according to the

Windows system you are using. Here we are taking the example of Windows XP.

1. Click Start on the taskbar and choose Control Panel from the Settings menu.

2. Select System to open the System Properties dialog box, and then under the

Hardware tab, click the Device Manager button to open the Device Manager dialog

box.

3. Double-click the Other devices item in the list to show the IEEE 802.11b PRISM3 USB

icon, which is displayed with a yellow icon beside. Right-click the icon and choose

Update Driver from the opened menu.

Figure 5 -6: The Device Manager Dialog Box

4. In the Hardware Update Wizard dialog box, choose Install the software

automatically [Recommended] and then click Next to continue.