User's Manual

M061703V10

Figure 2.2-4: The Wireless Network Connection Properties Dialog Box

c) Click OK. Now, you have successfully removed the Windows Zero Configuration.

To monitor and configure the network via WLAN PRISM3 IEEE802.11b, double-click its

tray icon, and you shall find four tabs contained in the popped up PRISM Wireless

Settings dialog box this time. For more information on WLAN PRISM3 IEEE802.11b,

please refer to WLAN PRISM3 IEEE802.11b Basics below.

Note: If you wish to use Windows XP’s built-in configuration tools – Windows XP Zero Configuration,

please refer to the next chapter: Configuration for Windows XP to configure the WLAN USB Stick.

2.3 Verifying a Successful Installation

To confirm that your 802.11b Wireless LAN USB Stick is properly installed, please go along with the

procedures below.

1. Right-click the My Computer desktop icon and choose Properties from the opened menu.

2. In the System Properties dialog box, choose Device Manager if you are under Windows 98

or Me. If you are operating Windows 2000 or XP, click the Hardware tab, and then choose

the Device Manager button.

3. In the opened window, expand Network adapters to find the USB Stick - WirelessLAN

PRISM3 IEEE802.11b USB Stick. Right-click over the item and choose Properties.

4. From the opened dialog box, on the General tab, find the descriptions under the Device

Status pane to learn if the USB Stick is working properly. However, if there’s an error