User's Manual

M061703V10
5
Figure 2.1-4: The Reboot Screen
g) After rebooting, you will find the WLAN PRISM3 IEEE802.11b icon, , appeared in the
system tray. The installation is entirely finished at the moment. Double-click the icon to
launch the application and open the PRISM Wireless Settings dialog box, in which you
may freely arrange your network connection afterwards.
For more details about WLAN PRISM3 IEEE802.11b, please refer to WLAN PRISM3
IEEE802.11b Basics in this manual.
2.2 Installation Notes - Windows XP
If your system is running Windows XP, you shall find that two tabs are contained in the PRISM Wireless
Settings dialog box after you’ve followed the instructions above and successfully installed the drivers.
However, normally, the dialog box should be consisted of four tabs. This is because Windows XP has its
built-in configuration tools – Windows XP Zero Configuration to assist you in networking activities. It is
recommended to utilize the attached WLAN PRISM3 IEEE802.11b to enjoy more benefits it will bring.
Thus, to employ your WLAN PRISM3 IEEE802.11b under Windows XP, please proceed to the next step
to change the default settings of Windows Zero Configuration to WLAN PRISM3 IEEE802.11b.
Figure 2.2-1: The WLAN PRISM3 IEEE802.11b Tray Icon