User's Manual

11
Figure 2.3-5: The Setup Complete Dialog Box
g) Plug the 802.11b Wireless LAN PCMCIA Card into your PC’s PCMCIA slot, and
Windows 2000 will automatically detect your 802.11b WLAN P3 PCMCIA Card and start
up the installation with the appearance of the Found New Hardware message box.
h) Later, Windows will notify you that the driver has not passed Windows Logo testing.
Because the input device has been tested to work with Windows 2000, click the Yes
button in the Digital Signature Not Found dialog box.
Figure 2.3-6: The Digital Signature Not Found Dialog Box
The installation is entirely finished afterwards. Double-click the PRSIM Configuration
Utility tray icon on the right bottom of the screen to arrange more settings for the
network connection. To learn more about the application, please refer to PRISM
Configuration Utility Basics in this manual