User's Manual

21
following figure appears.
Figure 3.4-2: The Advanced Tab
You shall see the value for any of these properties by clicking over an item displayed in the
Property field. If a value has been set for the property, it appears in the Value field on the right of
the list. You may click to specify the Value settings from the offered drop-down list. Choosing Not
Present under the Value field will disable the value options of specified property.
The following texts explain the four properties in the Property list displayed by this tab, which are
important and effective when operating the module.
Authentication TYPE
Specify a pre-defined profile with standard parameters from here. The provided profiles include:
 Based on WEP setting (Auto switching) – switch automatically between Must use
Shared with WEP (Share key) and WECA Compliant (Open key) for better security
without missing any possibility of networking connections.
 Must use Shared with WEP (Share key) – limit the connection permission only when
the devices communicate with same WEP keys. This provides a higher security.
 WECA Compliant (Open key) – open for all connective networks to access. This is an
option of less security.
Configuration Profile
Specify a pre-defined profile with standard parameters from here. The provided profiles include:
 B only – for operation in 802.11b environments only
 B WIFI – for operation in 802.11b environments conforming to WiFi specifications